CAB A6 Manuale dell'Operatore Scaricare il pdf (Pagina 43)

43cab Produkttechnik GmbH & Co KG

A3-2 / A3 / A4 / A6

Preparation for Tear-Off Mode / Rewind Mode

The R-version printers are delivered with the rewind guide plate (1) mounted

for operation in rewind mode. With the optional tear-off plate the printer also

may be operated in tear-off mode. For this purpose the rewind guide plate (1)

must be replaced by the tear-off plate (3).

The P-version printers are prepared for the dispense mode. After mounting the

optional tear-off or rewind guide plate the printers also may be operated in tear-

off or rewind mode.

7. Media Loading

Fig. 7b Exchange Rewind Guide Plate / Tear-Off Plate

The exchange of the different plates can be made in a similar way as the

exchange rewind guide plate / tear-off plate :

1. Open the cover.

2. Loosen the two screws (2).

3. Slide the rewind guide plate (1) to the right as far as possible to remove the

plate from the printer.

4. Place the slotted holes on the tear-off plate (3) over the screws (2) on the

front of the printer and slide the plate to the left until it stops.

5. Tighten the two screws (2).

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 137 138

Nessun commento

CAB A6 Manuale dell'Operatore Pagina 43